Project Galleries

Photo Galleries

Ditcher

Our surface ditching machine can cut a 5-foot-wide flat bottom ditch. It is controlled by RTK/GPS to ensure that the ditch is cut on grade. Its many uses include cutting new ditches to drain stubborn water holes, creating waterways, widening spinner ditches so they are smooth on equipment, and cleaning out diversion ditches.

View Ditcher Photo Gallery

Video Gallery

Installing 3 inch field tile with three machines (1 of 3)

The machine on the left is a 2010 Bron 550. The one in the middle is a 2008 Bron 550. The one on the right is a 2003 Bron 450. All three machines are installing 3 inch tile.

Installing 3-inch field tile (1 of 2)

A 2010 and a 2008 BRON tiling maching install 3 inch field tile side by side. Both machines have 550 HP. For grade control, both machines can use GPS or Laser systems.

Installing 3 inch field tile with three machines (2 of 3)

Hayden Tiling installing 3 inch field tile with three Bron drainage plows.

Installing 3-inch field tile (2 of 2)

A 2010 and a 2008 BRON tiling maching install 3 inch field tile side by side. Both machines have 550 HP. For grade control, both machines can use GPS or Laser systems.

Installing 3 inch field tile with three machines (3 of 3)

Hayden Tiling installing 3 inch field tile with Bron drainage plows.

10″ outlet with steep grade

10″ outlet just installed. The main is about 3000 feet long and it was running this much by the time we got done installing it. The outlet has about 4 feet of fall in 100 feet. The rest of the main is on a one-tenth grade.